Tab Key on the keyboard after typing the IP Address and the Subnet Mask should populate automatically. Note: The IP Address for the computer should be similar to the display IP Address, but NOT the same.Type in the desired IP Address for the computer or select Obtain IP Address Automatically for DHCP.Make note of the current IP settings for the computer.

Internet Protocol Version 4 then click on

Right Click on the appropriate adapter ( Local Area Connection for direct connect to computer or correct USB to Ethernet adapter) then click on.

Open Network and Sharing Center when the window opens.Ĭhange Adapter Settings in the left toolbar.

Click on the network icon at the bottom right of your computer screen.

If display is not using the default IP Address, set computer's IP Address to a static IP Address similar to the display's controller.

If using the default Daktronics IP Address of 172.16.192.25 on the display, use the following IP Address of 172.16.192.20 and a Subnet of 255.255.0.0 on the computer.

Note: (If display's IP Address is not known, cycle power and watch the start up sequence for the IP Address of the controller):.

Change IP Address on computer Local Area Network adapter or USB to Ethernet adapter to a similar IP Address.

Gigaware usb to ethernet mac set up